Common Questions about ADS-B
When should I equip for ADS-B?
When you’re required to equip for ADS-B depends largely on where you fly. In the U.S., you must equip by 2020. But in other parts of the world, you may be required to equip much sooner. Regardless of regulations, you can equip today to start taking advantage of ADS-B’s benefits.
Who needs ADS-B?
Simply put, anyone who flies in controlled airspace will need an ADS-B “Out” solution. But even if you don’t currently fly in controlled airspace, there may still be situations where you’ll be required to be ADS-B “Out” compliant in the future.
Why are we switching to ADS-B?
ADS-B allows air traffic controllers to route traffic more efficiently, reducing congestion, noise, emission and fuel consumption. It also promises to keep our skies safer by enhancing situational awareness. And even better, properly equipped aircraft will gain an affordable way to get datalink traffic, as well as subscription-free weather over the U.S.
How do I equip for ADS-B?
There are a lot of things to take into account when planning your ADS-B installation — like your current aircraft configuration and what ADS-B benefits you’d like to take advantage of. View the video for help understanding all the factors involved. Then use the planning tool below to get a detailed hardware recommendation based on your specific needs.
What is an approved ADS-B position source?
With ADS-B, each aircraft needs an approved ADS-B position source to calculate its precise position using highly accurate WAAS/SBAS GPS data. This position is then broadcast to ATC and other ADS-B “In” equipped aircraft in their vicinity.
How do I broadcast my ADS-B information?
You can either broadcast your information using an extended squitter or by using a universal access transceiver. Which option is best for your aircraft depends on where you fly and what equipment you might already have installed.
What is ADS-B “In” and ADS-B “Out”?
With ADS-B, you’ll be required to broadcast your position information to ADS-B ground stations and other aircraft. This is called ADS-B “Out.” But those ground stations are also broadcasting valuable information you can use if your aircraft is equipped to receive it using ADS-B “In” technology.
Why use a Garmin ADS-B Solution?
Garmin technology is at the forefront of the ADS-B revolution. Not only do our solutions meet requirements, they can also go above and beyond the call of duty, offering benefits like TargetTrend™ and SURF technologies. Plus, they’ve been designed to perfectly integrate with your existing Garmin avionics and are backed by our award-winning product support.
What is ADS-B?
ADS-B, or Automatic Dependent Surveillance-Broadcast, is a new technology that allows air traffic controllers to see traffic with more precision than ever before. Instead of relying on decades-old radar technology, ADS-B uses highly accurate GPS signals. As a result, ADS-B works where radar often doesn’t — even in remote areas or mountainous terrain. And because it can function at low altitudes and on the ground, it can also be used to monitor traffic on airport taxiways and runways. Air traffic controllers aren’t the only ones who will see the benefits of ADS-B, though. Aircraft with certain equipment can also receive ADS-B traffic and subscription-free weather information while in flight over the U.S.
How does ADS-B work?
Under the NextGen Air Transportation System and Single European Sky (SES), properly equipped aircraft will broadcast their identity, position, track, speed and other vital data via what’s called ADS-B “Out” technology. Air traffic control ground stations and ADS-B “In” equipped aircraft receive this information once every second. These ADS-B ground stations are broadcasting traffic information – and subscription-free weather in the U.S. – back up to properly equipped aircraft in the service area for display in the cockpit.
What are the benefits?
Air traffic controllers will be able to reduce congestion, noise, emission and fuel consumption through more efficient routing and resource management. Because the system has the ability to provide pilots access to detailed traffic information, ADS-B also represents a leap forward in pilot situational awareness and will greatly enhance the safety of all those in the air.
With optional ADS-B “In” equipment, like the GDL® 88 series for certified aircraft and GDL 39 portable ADS-B receiver, properly equipped aircraft can also receive highly accurate traffic information directly from other aircraft and ADS-B signal corrections. In the U.S., they can also access graphical NEXRAD radar information, as well as METARs, TAFs and other subscription-free aviation weather information.
When should I equip for ADS-B?
In the U.S., if you operate in airspace that currently requires a Mode C or Mode S transponder, you’ll need to be equipped with ADS-B “Out” by 2020. This includes Class A, B, or C airspaces, Class E airspace at and above 10,000 ft MSL over the 48 contiguous United States and the District of Columbia, and Class E airspace over the Gulf of Mexico from the coastline of the U.S. out to 12 nm and above 3,000 ft MSL. Even if you don’t fall into one of these categories, you’ll still need an ADS-B “Out” solution if you find yourself flying from the surface up to 10,000 ft MSL within 30 miles of most primary Class B airports.
Australia — All Australian aircraft operating at or above FL 290 must be equipped with 1090 ES ADS-B “Out” functionality by Dec. 12, 2013. All aircraft that operate in Class A, C, or E airspaces extending 500 nm to the north and east of Perth Airport must be ADS-B “Out” capable by Feb. 4, 2016. Any IFR-capable aircraft placed on the Australian aircraft register on or after Jan. 1, 2014 will need to be compliant by Feb. 6, 2014, and any aircraft placed on the Australian aircraft register before Feb. 6, 2014 will need to be compliant by Feb. 2, 2017.
Europe — All aircraft operating in European airspace must be equipped with 1090 ES ADS-B “Out” with a Diversity Mode-S transponder by Jan. 8, 2015, for new aircraft, and Dec. 7, 2017, for existing aircraft. This only applies to aircraft>12,500 lbs or max cruise>250 kts TAS.
What equipment do I need for compliance?
First and foremost, you’ll need a WAAS position source...
...such as a GNS-430W / GNS-530W or GTN series avionics. This calculates your required position, track, altitude and speed information from signals it gathers from GPS satellites and WAAS signal corrections.
Next, you’ll need a way to broadcast this information to ADS-B ground stations...
...If your aircraft flies at or above 18,000 ft over the U.S., or anywhere internationally, you will be required to use the 1090 MHz frequency using a Mode S Extended Squitter (ES) transponder — such as the GTX-330ES.
Aircraft that only fly below 18,000 ft and only in the U.S. can opt instead for a dedicated 978 MHz Universal Access Transceiver (UAT). The 978 MHz UAT frequency will allow you to keep an existing Mode C or Mode S transponder that you may already have. Installing a 978 MHz UAT with ADS-B “In” technology such as the GDL 88 series allows you to view Traffic Information Service-Broadcast (TIS-B) and Flight Information Service-Broadcast (FIS-B) information on a compatible flight display.
Why should I pay for ADS-B “In” if I’m only required to have “Out”?
If you only equip for ADS-B “Out,” you’re investing a lot of money without seeing any real benefit in the cockpit. You’re simply transmitting your position to ATC and other aircraft in your vicinity. But by adding an ADS-B “In” datalink receiver and a compatible cockpit display, you’d also be able to view highly accurate traffic data from other aircraft and ADS-B ground stations, as well as subscription-free weather information (U.S. only). You’d gain valuable situational awareness and safety with minimal investment versus what you’d need for ADS-B compliance anyway.
Where are ADS-B ground stations operational?
In the U.S., nearly 400 ADS-B ground stations were completed and operational by mid-2012, with most of the rest — totaling more than 700 planned stations — expected to be up and running by early 2014. The graphic below illustrates where ADS-B is up and running. In the areas highlighted in blue, you can already start taking advantage of ADS-B’s datalink traffic and subscription-free weather services if you’re equipped with an ADS-B “In” solution.
Why should I consider a dual (diversity) antenna installation for my ADS-B solution?
Antenna diversity technology configures your aircraft with both top- and bottom-mount antennas to reduce the potential for antenna “shading,” which helps prevent target drop out during turns and maneuvers. An optional top-mounted antenna also comes in handy during ground operations, when a bottom-mount mount antenna might not have clear line-of-sight to receive ADS-B ground station signals or transmissions from other participating aircraft.
I already have an active traffic system, how will this work with ADS-B?
For those who fly outside of the U.S., an active traffic system will still be the only source of traffic information you can receive. In the U.S., adding ADS-B datalink traffic capability can provide you with the most comprehensive traffic picture possible. Our GDL-88 series integrates with active traffic systems. It takes in traffic data from ADS-B sources and active traffic systems (TCAS/TAS/TCAD) then correlates the data. If a single target is being provided by multiple sources then the source with the best integrity is used to display the target. Having an active traffic system will give you traffic data when operating in uncontrolled airspace.
If I am receiving and displaying ADS-B “In” datalink traffic, why do I need an active traffic system?
During the transition to ADS-B, those that haven’t yet equipped will not be transmitting their information via ADS-B “Out.” In the U.S, when you’re flying outside the range of a TIS-B ground station uplink, you will not see these targets on your flight display. Thus, you’re not getting the entire picture until everyone becomes equipped in 2020. When paired with an ADS-B “In” solution like the GDL 88 series, an active traffic system like the GTS-800 series provides the most complete traffic picture possible.
How can I tell if I have an appropriate high-integrity WAAS / SBAS position source?
Both the GNS 430W / GNS 530W and GTN series have the WAAS/SBAS GPS technology capable of meeting the requirements of an ADS-B “Out” position source. Older, non-WAAS/SBAS GNS 430/530 navigators can be upgraded to the WAAS/SBAS version that has the technology. In addition to helping you reach ADS-B “Out” compliance, WAAS/SBAS navigation offers additional benefits like being able to fly GPS-guided LPV glidepath instrument approaches down to as low as 200 ft where approved. If you’re unsure whether your GNS is equipped with WAAS/SBAS, just watch the initial splash screen during the start up. If a “W” is displayed after the model number, it is in fact a WAAS/SBAS version.
How can I tell if my GTX 330, GTX 33 or GTX 23 is an Extended Squitter (ES) transponder and/or meets the current requirements for ADS-B “Out”?
To understand if your GTX 330 is an Extended Squitter version, pay attention to the splash screen when your avionics are being powered on. You'll see either "GTX 330" or "GTX 330 ES." This should make it clear which version you have. The same is true of the remote GTX 33. It should be noted that the GTX 23 is only available with an Extended Squitter.
No matter if you have an Extended Squitter version, transponder or not, an upgrade is available. We are an authorized Garmin dealer and can make arrangements for this upgrade to bring you into compliance w/ the ADS-B Mandate.
GDL-88 Dual-link Universal Access Transceiver (UAT)
•Complete ADS-B “Out” solution for many aircraft
•Receives FIS-B subscription-free weather
•Receives ADS-B datalink traffic
•Optional SBAS/WAAS GPS receiver
GDL-39 Portable ADS-B Receiver
Display ADS-B traffic and subscription-free weather on your mobile device, Garmin aviation portable or G3X.
GTX-330 / GTX-33 / GTX-23 Transponders
Available with extended squitter technology, the GTX-330, GTX-33 and GTX-23 Mode S transponders provide ADS-B “Out” and can receive Traffic Information Service (TIS) alerts.
GTS Series Traffic Systems
Supplement ADS-B traffic with a GTS-800, GTS-825 or GTS-855 traffic system for the most complete traffic picture possible.
What is an extended squitter?
Discover what you can get by extending your squit.
Why do more than is required?
Find out why doing the bare minimum may not do much for you.
For a quote on avionics work or avionics equipment click HERE!
To contact us about a question or issue with your avionics click HERE!